460-915

Legend Stainless Steel Tubing Clamp

These stainless tubing clamps boldly goes where those other fittings can’t – mainly in tight, hard-to-reach spaces. With a unique "tab" design, there is no need to get a tool around the entire fitting. Simply press the tab closed with the tool and the connection is complete. This design offers a positive mechanical connection, ensuring the tubing is uniformly compressed against the fitting. The ratcheting tool only releases when proper assembly is complete. No guess work is needed to determine if the connection has been properly made. The unique design makes the new tool dramatically simpler and easier to use. One tool installs all sizes from 3/8 in. to 1 in.

It’s a cinch

• Ratcheting tool provides easy one-tool assembly.
• Connections can be dry-fit.
• Connections can be made with wet tubing.
• Final connections take only seconds.
• CinchTool only releases when connection is complete, ensuring a perfect connection.
• No calibration required on the CinchTool.
• Can visually verify whether connection is completed – tab of clamp is “pinched”.
• Connection rated to 160 psi @73°F; 100 psi @ 180°F
• Clamp is an interlocking ring, forming a complete 360° uniform, watertight seal.
• Corrosion resistant, annealed 304 stainless steel.
• Uses ASTM F1807 brass or ASTM F2159 plastic insert/crimp fittings(plastic for potable systems only).

Approvals

• Manufactured in accordance with American Society for Testing and Materials (ASTM International) F877 and F1807
• Listed by the NSF International to NSF Standards 14 and 61 for use in potable water system
• Listed by NSF International to be in compliant to the Uniform Plumbing Code
• Labeled B137.5 which indicates that it is compliant to the CSA Standards B137.5