Skip to Content
  • 25+ Years Experience
  • American-Made Quality
  • Expert Technical Support
  • Fast Shipping

557

Tekmar tekmarNet Thermostat - Radiant Floor, 2 Heat Pump/Cool, Backup, Humidity

The tekmarNet® Thermostat 557 is a communicating touchscreen thermostat designed to operate either: a hydronic radiant floor with a two stage heat pump (water-to-air or air-to-air) for heating & cooling and an emergency backup heating system; or two stages of heating and two stages of cooling. There are three auxiliary sensor inputs that can be used to measure room, floor, outdoor or duct temperature. The optional floor sensor allows precise heating of radiant floors. Relative humidity level can be measured and controlled using either the built-in or external humidity sensor. The large touchscreen display allows you to easily adjust 7-day programmable schedules and room temperatures to optimize comfort and energy savings. The 557 can connect to tekmarNet ® controls using two or four wires or it can operate as a stand-alone device.

  • Warm weather shut down, zone synchronization
  • Zone post purge, programmable schedule
  • Temporary hold, away scene key
  • Auto heating cycle, tekmarNet® communication compatible
  • Touchscreen technology, 3 Auxiliary sensor inputs
  • Radiant floor heating and cooling, outdoor and floor temperature display
  • Air group master, network schedule master or member
  • Optimum start, scenes
  • Daylight savings time, backlight
Factory Direct
599.91 599.91

30-day money back guarantee
  • Manufacturer
  • Ambient conditions
  • Approvals
  • Enclosure
  • Control
  • 0-10 V (dc) Output
  • Humidity Sensor
  • Temperature Sensor
  • Relays
  • Packaged Weight
  • Environmental
  • Included Sensors
  • Dimensions
  • Voltage
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Manufacturer: Tekmar
Ambient conditions: Indoor use only, 32 to 122ºF (0 to 50ºC), RH ?90% non-condensing
Approvals: Meets Class B: ICES & FCC Part 15
Enclosure: White PVC plastic, NEMA type 1
Control: Microprocessor control. This is not a safety (limit) control
0-10 V (dc) Output: 3.3 V (dc) humidity sensor power, 3.0 mA maximum
Humidity Sensor: 0 to 90% +/-3% RH
Temperature Sensor: NTC thermistor, 10 k? @ 77°F (25°C ±0.2°C) ß=3892
Relays: 24 V (ac) 2A
Packaged Weight: 0.9 lb. (400 g)
Environmental: Compatible with chlorinated swimming pool environments. Do not use in presence of ammonia (animal barns), methanol, ethanol, acetone.
Included Sensors: None
Dimensions: 4-1/2" H x 4-3/4" W x 7/8" D (114 x 120 x 22 mm)
Voltage: 24 V ±10%, 60 Hz, 2 VA standby, NEC / CEC Class 2

Tekmar tekmarNet Thermostat - Radiant Floor, 2 Heat Pump/Cool, Backup, Humidity