Tekmar Slab Sensor - 20' (6 m) wire

    114.27 114.27 114.27 USD


    This combination does not exist.

    Add to Cart

    Tekmar Slab Sensor - 20' (6 m) wire


    Agency ApprovalsCSA C US
    Dimensions3/8" OD x 1 1/2" (10 mm OD x 38 mm)
    Operating Range-60 to 140 degrees F (-51 to 60 degrees C)
    SensorNTC thermistor, 10 k ohms at 77 degrees F (25 degrees C plus / minus 0.2 degrees C) Beta = 3892
    Sensor MaterialHDPE sleeve, 20 FT (6 m) HDPE jacketed wire

    The Slab Sensor 072 is designed to measure temperature in outside snow melting slabs. It has a high density polyethylene (HDPE) sleeve which is designed for use in conduits, soils, or concrete, as it is suitable for direct burial. This product is supplied with 20 FT (6 m) of 2 conductor cable.


    • Water resistant

    • 10K thermistor

    • 20 ft (6 m) cable

    • Designed for use in conduits, soils, or concrete

    Tekmar Snow Melt Sensor Selection & Installation

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products