003

Tekmar Relay - 24 V (ac) coil

    62.52 62.52 62.52 USD

    62.52

    This combination does not exist.

    Add to Cart

    Tekmar Relay - 24 V (ac) coil



    Packaged weight0.4 lb. (180 g)
    Dimensions3" H x 1-9/16" W x 2-3/8" D (75 x 40 x 60 mm)
    ApprovalsCSA C US
    Power supply (coil)24 V (ac) +10%, -20%, 50 Hz 2.7 VA, 60 HZ 2.3 VA
    Relay contacts (max.)10 A resistive @ 250 V (ac) N.O., N.C.
    10 A resistive @ 30 V (dc) N.O., N.C.
    7 A inductive @ 250 V (ac)
    Relay contacts (min.)10 mA 1 V (dc)
    Ambient conditionsIndoor use only, -40 to 140°F (-40 to 60°C), RH < 85% Non-condensing
    WarrantyLimited 3 Year Warranty

    DPDT 24 V (ac) coil  Relay

    The Relay 003 is a 24 V (ac) coil DPDT (double pole double throw) relay that is used to isolate electrical loads and allow higher current ratings than the on board relays found on tekmar controls. It can be used in applications ranging from doubling the capability of a single output (e.g. energize a pump as well as provide a boiler demand from one output) to allowing a pump to be used that draws more than the control s specified relay rating. This product uses a 24 V (ac) coil that once energized, closes 2 normally open contacts, and opens 2 normally closed contacts.

    Features

    • Double Pole Double Throw relay (DPDT)Works with any tekmar control that uses 10K sensors
    • Easy to replace ("ice cube" style - no need to remove wiring)
    • Isolate electrical loads
    • LED to indicate when energized
    • Test tab for easy test and manual override

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products