Watts Radiant Stainless Steel Manifolds are sold in pairs, one supply and one return, mounted to metal bracket as shown.
(Number of Circuits may differ from picture)
Create a Professional Appearance
After the installation, manifolds are
one component homeowners and
builders will actually see.
Versatility
1 to 12 circuits
1 in. and 1-1/2 in. trunks
4-wire actuators for individual
circuit control
Mounts in a 2x4 wall
Easy to add extra circuits
Bring supply/return in from
either end
Each circuit can be individually balanced by adjusting the valve located under the blue cap or under the flowmeter
Maximum flow rates are 12 gpm for 1 in. manifolds and 20 gpm for 1-1/2 in. manifolds. Individual circuit flow meters are 0-2 gpm for 1 in. and 0-4 gpm for 1-1/2 in. manifolds.
Circuits can be completely isolated by closing ballancing valves under blue caps and inside flowmeters.
Manifolds and gauges are rated to 180°F and 80 psi pressure. Fittings are spaced at 2-1/8 in. on center.
Save Time on Installation
Seamless, one-piece construction
Already mounted on brackets
Easy to balance fl ow or fi nd air-locked circuits with fl ow meters
Easy to measure zone
temperature drop
Accessories
Vent/Purge assembly
End cap
Pressure differential by-pass
Thermal actuators
Trunk isolation valves with
temperature gauges
Circuit isolation valve
Circuit isolation caps
Sweat and NPT transitional fittings
IsoTherm Mixing Pump
Manifold Boxes
Accesories: Trunk Isolation Ball Valves, Vent/Purge Assemblies, and Actuators are purchased separately. For added convenience, several of these accessories can be purchased in kits.
Watts Radiant Stainless Steel Manifolds are sold in pairs, one supply and one return, mounted to metal bracket as shown.
Accesories:
