Cabinet-grade Baltic Birch Header Sticks are used to hold loops of E-Pex at opposite ends of a room.
Special Patent-Pending design holds PEX without squeaking or popping. They are made in two thicknesses‚ 15 mm and 18 mm. Order 15 mm components for 3/8" E-Pex; order 18 mm for 1/2" PEX or 3/8" Onix. They are built with 11 laminations and CNC routed to precise dimensions to give you a precision-fit radiant subfloor.
Watts uses only Group 1 density or better as required by hardwood floor manufacturers to ensure fastener holding capacity.
Each stick is 42" long and contains three bends (one bend pictured). If using strip hardwood flooring‚ run sticks the same way as (parallel to) the flooring. Allow for enough length of Header Sticks to run along two opposite walls |
|
|
|
