FloorStat Control
The non-programmable FloorStat is very simple to operate. Just push the on/off button and turn the dial to set the floor temperature. It has several other features:
• A floor sensor that directly senses floor temperature
• Built-in ground fault protection with no need for a separate GFCI (in most code areas)
• Temperature range of 59° to 95°F
• 16-amp capacity to control up to 150 sq.ft. of 120-VAC HeatWeave mats or 300 sq ft of 240-VAC mats.
• Connection for new Remote FloorStat Control..
