tekmarNet®4 (tN4) Setpoint Controls can be used for wide range of applications such as a pool, hot tub and radiant control. When a Setpoint Control 161 or 162 is used in a system with an Outdoor Reset Module, it is seen as an additional demand that can call for a pre-determined temperature.
The 161 provides a choice between four modes of operation. The 162 offers six. The installer can select the type of application from On/Off Setpoint, On/Off Hot Tub, On/Off DHW Tank, PWM (Pulse Width Modulation) Setpoint, PWM Floor, and PWM Pool.
Setpoint using on/off differential
Domestic hot water tank
Integration with tekmarNet®4 Systems
Can be used with User Switch 480 and 481 to provide pre-set options
Adjustable Schedules and Scenes
Microprocessor PID control; This is not a safety (limit) control
0.46 lb. (210 g), Enclosure J, white PVC plastic
2-7/8" H x 2-7/8" W x 13/16" D (73 x 73 x 21 mm)
CSA C US, CSA/UL 61010-1, meets Class B: ICES and FCC Part 15
Indoor use only, 32 to 122°F (0 to 50°C).
92% RH up to 104°F (40°C), 50% RH if > 104° (40°C)
Altitude < 9840 feet ( 3000 m), Installation Category II, Pollution Category 2